|
|
|
|
||||||
|
E90 Sedan / E91 Wagon / E92 Coupe / E93 Cabrio - General Forum
The E9X is the latest evolution of the BMW 3 series including the highly tuned twin turbo 335i variant pushing out 300hp and 300 ft. lbs. of torque. BMW continues to show that it sets the bar for true driving performance! Post questions about "upgrading" from your current E46 here or jump over to E90Fanatics.com! |
 |
|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
01-21-2013, 06:59 PM
|
#1 |
|
Registered User
Join Date: Jan 2013
Location: Vancouver, Wa
Posts: 23
My Ride: 2006 325i
|
Brake pad sensor reset
I found that my rear brake pad sensor was frayed after getting a code. I replaced the sensor today but the code still shows (car on lift in red and work "brake" in red). Do both sensors need replacing in order for code to go away? The other sensor is intact. Or will this go away on its own?
Thank you!! |
|
|
|
01-23-2013, 02:14 PM
|
#2 |
|
Registered User
Join Date: Jan 2013
Location: Vancouver, Wa
Posts: 23
My Ride: 2006 325i
|
For anyone listening....
Swapped both sensors, reset the warning, via instrument cluster, and the warnings went away..... Bad ass.... |
|
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
