e90 valve cover gasket 2007 328i

[msmith8978]

I have searched the forums quite a bit, and just got the Bentley Manuel. Is there anyone out there that has a comprehensive DIY for an e90 Valve cover gasket replacement. The Bentley is great, but it assumes a fair deal of knowledge. Is there anyone out there that has done it, and documented it every step of the way? If so, Please share! One might say that if the Bentley doesn't explain what you need, you shouldn't do it, which I get, but the fact is, it's like baking. There is a recipe for VCG replacement, and someone needs to write it up from the very beginning steps to save a lot of people a lot of money! I hope that writeup exists, but if not, I will document my endeavor and post it here for sure!

Enjoying the hell out of 25 smiles per gallon :-)

[ECSTuning]

The head gasket on the N52 in your 328i isn't tooo terribly difficult. HERE is a pretty decent diy which should help supplement the Bentley. The diy found HERE also should help you a bit. If you also need the parts, I have the new valve cover gasket sets avaible HERE.