GREAT NEWS FOR EVERYONE! We have got you the
AFE Stage 2 Dual Filter Cold Air Intake for the BMW 335i and other N54 engines (54-11472)!
AFE Dual Filter Cold Air Intake (135/335/535)
http://www.modbargains.com/product.aspx?pf_id=AFE_Intake_135_335_535_MW
ModBargains.com is proud to introduce Advanced Flow Engineering (aFe) Stage 2 Dual Filter Cold Air Intakes for your BMW 335i! AFE filters are constructed from
100% poly-urethane which makes them very durable, and resistant to high temperatures and chemicals. The construction of the pleats of the filter is deeper than that of any other filter, this provides for an
increased flow and
prevents a greater amount of dust from reaching your engine.
An
AFE Stage 2 Cold Air Intake System for your 135/335/535 is one of the easiest and
most cost effective ways to increase your car's performance. The cold air intake replaces your restrictive factory air box which allows for an increased air flow meaning
more horsepower. Another feature of the intake is the
16 gauge powder coated steel heat shield. A heat shield makes sure that the intake doesn't use the hot air around your engine and only allows the intake to receive cooler air, which adds
more power. Not
only does
power increase, but many have observed an
increase in MPG. Give your car a boost in power while improving fuel economy with an AFE Cold Air Intake.
AFE Intake Benefits
*
27 horsepower gain
*
34 Ft./lbs of torque gain
*
Increased throttle response
*
Better fuel economy, usually a 1-2 MPG gain is observed
*
New look under your hood
*
Washable /
reusable filter
* Installs in
less than 60 minutes and uses factory mounting points
* Limited
lifetime warranty
Performance Gains
The AFE dual filter intake system
increases airflow by
98% over stock allowing for a nearly un-restricted airflow,
maximizing power gains. The dyno proven gains show an increase of
27 horsepower and
34 Ft/lbs. of torque at the rear wheels.
Installation - Instructions are on our listing! Check it out
here!!
* Can usually be installed in
under 60 minutes
* Uses
factory mounting points
*
No special tools required
*
No cutting, and drilling required
Applications
2008+ 135i (E82/E88)
2008+ 535i/xi (E60/E61)
2007+ 335i/xi (E90/E91)
2007+ 335i/xi (E92/E93)
If anyone has any questions or you want to make a purchase, give us a call at 714-582-3330 or
contact us!
You guys can always reach me via PMs, e-mails (James@ModBargains.com), or even IM me on AIM @ ModBargainsJames.
Buy Your AFE Dual Cone Cold Air Intake Today! -
AFE Dual Filter Cold Air Intake (135/335/535)
Enjoy
!!
Linear Mode
