e9x umnitza projector install

I am going thru the install process and have had lots of headaches.

At this point everything seems to be installed correctly, but can't be.
The passenger side headlight's angels work great along with the turn signal and daytime/high beam.

THe drivers side turn signal and daytime run fine. The angels are barely flickering.

HIDs on both sides will turn on for 5 secs then the HID relay goes nuts and turns them off.

I have the resistors installed on the oem wiring where the lowbeam connected to and I think everything else looks right but I have to be missing something.

Anyone give assistance.
Corey

Alright. An update:

Got some of the bugs worked out of the install.
The fit and finish of the product was great. Only had to router the turn signal hole to accept the led bulb upgrade.

HIDs are super bright. They were easy to adjust the height.

However, I am having issues. During installation, the passenger side lit up great. When it was the only light connected I was really impressed. Once installation was completed, the drivers side angels were not coming on. Then it evolved to just the inner angels (closest to kidneys) were coming on (on on each headlight). Now the passenger side's inner ring is still coming on and the drivers side is fading.

The HID cut out once as well. I drove to my destination, got out and inspected. Drivers side hid out. Turn off car, pop the hood and check all connections. Everything was solid. Turn car back on, and light on.

The company I purchased this through has been very helpful and supportive thru this. But at this point they want me to try to resolder the angel eye connections.

Does this really sound like a solution? I am pist that I have to work more on something I paid a lot of money for.

Does anyone have input?

Passenger side during installation.


Drivers side during installation


Passengers side finished


Drivers side finished


Full front

How much and where did you purchase? Umnitza...I can figure it out from here.

Originally Posted by greenohawk69

How much and where did you purchase? Umnitza...I can figure it out from here.

I got mine from JLevis. good customer service.

Did you get yours? If so how did your install go?

Originally Posted by kavlock99

I got mine from JLevis. good customer service.

Did you get yours? If so how did your install go?

Not yet. Probably around Christmas I will get them. I have 2 motorcycles that I ride pretty much year round. I need to fix my new front bumper first...the driver side headlight bounces as it is loose. I think I've come up with a fix, but will need to test it first.

greenohawk69,

GL on the purchase. I may finally get to work on mine this weekend. If I ever get to fixing it, I'll put up pictures.